Building Management System

Approx. Rs 25,000 / MonthGet Latest Price

• The CPU has been incorporated into the back panel of the device, unlike comparable systems.
• Its capacity can be increased individually with plug-in communication modules and/or intelligent I/O modules.
• These have a direct, very fast bus connection to the CPU.

• Base unit with CPU and 4 slots for I/O modules, communication or other specific modules (e.g. PCD3.Hxxx counter modules).
• With the left expansion, the Standard (PCD3.M5/M6xxx) and High Power (PCD3.Mxx60) CPU types have slots for a battery holder module with LED indicators, a run/stop switch, two slots for flash memory modules and two additional communication interfaces.
• The LED indicators on the battery module display the status of the CPU and battery and any errors in the application.
• The battery also protects the data in the event of an interruption to the power supply.
• It can be replaced during operation while under power.
• The configuration, programs and data can be transferred from one controller to another using the plug-in flash memory modules.
• No programming tool is required for this.

Approx. Rs 30,000 / MonthGet Latest Price

Product Price :Get Latest Price

Product Price :Get Latest Price

Other Details:

• The spyder family of controllers are for use in vav (variable air volume) and unitary HVAC control applications.
• Each controller communicates via either lonworks® or bacnet ms/tp network communications.
• Each controller provides flexible, universal inputs (ui) for external sensors, digital inputs (di), and a combination of analog outputs (ao) and digital triac outputs (do).
• The sylk bus is included in each controller which enables connection to other sylk enabled devices.
• These controllers provide many options and advanced system features that allow state-of-the-art commercial building control.
• Each controller is programmable and configurable using the niagara ax framework® software.

Specifications:

• I/O Count: 6 UI, 4 DI, 3 AO, 8 DO
• Approvals, Federal Communications Commission: FCC Part 15, Subpart B, Class B
• Approvals, CE: Approved
• Building Management Interface: WEBs-AX; WEBs-N4
• Network Communications: BACnet
• Commissioning Software: WEBs-AX; WEBs-N4

Product Price :Get Latest Price

Product Price :Get Latest Price

• Honeywell Trend IQ4E controller has 10 universal inputs and 6 analogue voltage outputs and is expandable up to 192 points (depending on the controller variant) by adding I/O modules.
• This flexibility makes it suitable for a broad range of applications.
• The IQ4E controller uses Ethernet and TCP/IP networking technologies with embedded XML and is fully compatible with other Trend IQ controllers.
• The IQ4E supports BACnet over IP as standard.
• Trend communications over a current loop LAN is available as an option.
• A local PC or display (e.g. IQView4) can be connected to the RS232 port.
• A Wallbus port is also provided for use with room displays.

• 16 onboard I/O channels - 10 inputs and 6 outputs
• I/O bus supports up to a total of 192 I/O channels (depending on the controller variant) using additional I/O modules
• I/O bus length up to 300 m (328 yards)
• Ethernet 10/100 Mbps main network with TCP/IP protocol
• Trend current loop LAN option
• Embedded XML Web Services as standard
• BACnet over IP
• Wallbus for connection of room displays
• RS232 and USB local supervisor/engineering ports
• Automatic time synchronisation and daylight saving via SNTP
• DIN rail mounting, DIN 19 size 2 standard enclosure
• 230 Vac input power supply

• The IQ4E’s functionality can be divided into four sections: System, Hardware, Firmware, and Strategy.

• The IQ4E has communication ports for Ethernet, USB (Local Engineering), RS232 (Local Supervisor) and Wallbus. In addition / LAN variants have a Trend current loop:

• On units that do not have the current loop option (or on /LAN variants that have the current loop disabled) the IQ4E can form a Trend LAN with other devices over the Ethernet network.

• On units that have the current loop option (which is enabled), the IQ4E will form a Trend LAN with other devices on the current loop. In order to join an internetwork, an INC type device will be required elsewhere on the current loop LAN. The current loop may be wired in either a 2-wire or 4-wire configuration.
• Network Bypass Relay: If the IQ4E loses power a set of bypass relays will close to maintain the integrity of the current loop network. If the relays close it will be recognised by a downstream device, and reported as a LAN Changed alarm.
• Baud Rate: By default the IQ4E auto-detects the baud rate to use on the current loop. Where required, the rate can be set manually using configuration software.

• An RS232 port is provided for the optional connection of local display devices, sensors or supervisory tools. Only one device may be connected at one time. The connected device can be restricted to communicate only with the IQ4E or (if supported by the device) with the entire Trend network.

• The USB port allows connection of a PC running SET (System Engineering Tool). When connected in this way SET can communicate across the entire Trend network (see ‘Networking’ on page 4). When not in use the connector is protected by a retained flexible plastic plug.

• The Wallbus port facilitates the connection of room display devices (e.g. an RD-WMB series room display). These devices offer control and indication of parameters such as setpoint, fan speed and occupancy, as well as sensing temperature, humidity and CO2 levels.

Product Price :Get Latest Price

Part of Alerton’s BACtalk™ Ascent product line, Compass building management software delivers powerful, yet intuitive tools for controlling and monitoring even the most complex buildings.

Industry standard BACnet protocols provide the flexibility to integrate with existing building systems, allowing building operators to control and optimize their buildings in one convenient, easy to use interface.

The backbone of Alerton’s BACtalk™ Ascent product line, the Ascent Control Module (A​CM) is the industry’s most agile controller in its class. It combines Alerton’s pioneering and proven BACnet^® capability with Tridium’s^® Niagara Framework^® flexibility.

Product Price :Get Latest Price

System properties Up to 1023 inputs/outputsCan be expanded remotely with RIO PCD3.T66x  Up to 13 communication interfaces Onboard USB and Ethernet interface 2 Ethernet interfaces (PCD3.M6860 only)  Fast program processing (0.1 μs for bit operations) Large onboard memory for programs (2 MB) and data (128 MB file system) Memory with SD flash cards can be expanded up to 4 GB Automation Server for integration in Web/IT systems

Product Price :Get Latest Price

1. 1. BMS at MSME training Centre Durg 
      • • BMS Platform: Niagara framework Webs-N4 
        • Controllers: Honeywell Jace-8000 and Spyder Controllers 
        • Scope: Supply, Testing, Commissioning 
        • Brief Description: We than Kalyani technologies for entrusting GKCPL for the Supply of BMS at training centre of Govt of India’s Ministry of Small & Medium Enterprises department at Durg Chhattisgarh, India.  
   2. BMS expansion at Indian Institute of Technology (IIT) Chennai 
      • • BMS Platform: Honeywell Trend-963 
        • Controllers: Trend-IQ4E 
        • Scope: Supply & Commissioning 
        • Brief Description: G K Controls Pvt Ltd team performed BMS expansion at IIT Chennai. 
   3. BMS design consultancy for Singapore Ministry of Education schools 
      • • BMS Platform: Generic 
        • Controllers: Generic 
        • Scope: Design Consultation and Demo system supply 
        • Brief Description: G K Controls Pvt Ltd team performed BMS design consultation documentation for Singapore Ministry of Education schools through M/s Anacle System. The scope included design consultation for Lighting Control System apart from Centralized monitoring of all schools BMS. A demo system is supplied & commissioned at Anacle System’s India office.  

Additional Information:

Approx. Rs 18,000 / PieceGet Latest Price