Setra Clean Room Solutions

Approx. Rs 1,40,000 / PieceGet Latest Price

Product BrochureProduct Details:

Setra FLEX™ is a complete monitoring and control solution in a pre-configured and easy-to-use package. Offering all of the essential parameters that require monitoring, the FLEX will meet all of your critical environment needs.Detailed DescriptionSetra FLEX™ provides a flexible room environmental control and monitoring solution in a simple-to-use package. An attractive flush mount face plate is complemented by an intuitive graphical display to meet any architectural requirement.More Than a Room Pressure Monitor - The unit supports 3 rooms, monitoring up to 6 parameters for each room. These optional additional parameters can include humidity, temperature, occupancy, particle count, door status, air velocity, and many more environmental factors. An optional differential pressure sensor can be either factory-installed in the unit or ordered separately and installed above the ceiling. Integration with building automation systems is made easy through either BACnet/IP or BACnet MS/TP network protocols.Modular Design - A modular hardware design enables FLEX to fit in various wall thickness found around the globe. For applications which require the monitor to fit in wall depths less than 50mm, FLEX can be ordered with an external pressure sensor. When mounting in a three gang electrical box, FLEX can be ordered with an integrated on-board sensor. Sufficient on-board I/O provides connectivity for most common equipment and sensor applications. A high accuracy of 0.25% differential pressure transducer is used in all pressure sensing options. A projected capacitive touch screen provides swipe functionality and allowed for use with medical gloves. The face plate is attached to the unit body, enabling both tamper resistant operation and easy opening for pressure calibration. Setra FLEX-RM and FLEX-RC - FLEX software is designed to suit any application, with the ability to support up to 3 rooms. FLEX-RM (Room Monitor) provides monitoring only, for those applications where no control from the touch screen is needed. FLEX-RC (Room Control) offers monitoring, plus PI loop or network control of VAV boxes, venturi valves, or hydronic reheat valves. Software is pre-installed, with configuration and network integration done using simple setup screens. There is no programming required. When completed, configuration settings on one unit can be cloned to other devices using a standard USB thumb drive, thereby shortening commissioning time. Units can also be configured remotely over a BACnet network. FLEX's monitor is both a controller and a monitor, with audible and visual alarming on all room parameters. FLEX's monitor enables users to save energy by choosing from two PI control loops and two monitoring sets for any of four room modes, such as occupied and unoccupied.

Approx. Rs 38,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Setra Lite™ Room Pressure Indicator provides a simple, cost-effective, and accurate way to monitor and display room differential pressure in areas that today require manual verification.

Product description

Green means good to go and red indicates an alarm. Setra has created the simplest and easiest to use visual room pressure monitor in the market. Setra Lite™ is designed to easily fit in a single gang electric box, and also provides an optional visual display of the pressure, powered by Setra's legendary capacitive pressure sensor. Best of all, Setra Lite can tie into your building management system and has a plug-and-play connection with our Setra FLEX™Environmental Room Monitor.

For local staff managing an area, Setra Lite has a light ring that is green or red, showing a clear indication of room conditions. For the facility manager, using the Setra Lite means the frequency of preventative maintenance walk-by inspections can be reduced because Setra Lite is monitoring the space.

Features - Setra Lite has many features found only in larger, more complex room pressure monitors. These include a bright light ring that can be seen at an angle or down a hallway, a digital display of the pressure value that is always-on or momentary, an alarm delay for door entry, and POS or NEG room mode. Setra Lite sensor has Setra’s accuracy and reliability you know you can trust.

Simple Installation - Setra Lite is about the size of a standard light switch, and just as a simple to install. It fits in a single-gang US electrical box, or international 86-box, and is powered by 24VAC or 24VDC. The reference side pressure pickup is integral with the Setra Lite faceplate. An analog output provides the building management system with the pressure signal for any additional trending or alarming needed.

Works with Setra FLEX™ - Setra Lite also integrates seamlessly with the Setra FLEX environmental monitor. Mount Setra Lite at additional doors that enter the space, and use an on-screen badge to display its value.

Typical Applications

• Sterile processing
• Sterile storage
• USP 800 compliance
• Laundry
• Hospital room monitoring
• Infectious control
• Endoscopy
• Bronchoscopy
• Replaces ball/tube through the wall pressure indicators
•  

Setra Lite™ Features

• Simple single-room pressure indication for many pressurized healthcare spaces
• Saves preventive maintenance from manually checking each room
• Sleek and attractive single wall plate
• Simple to install in minutes
• Visual alarm via red/green light ring
• Silent operation, no audible alarm
• Offset light pipe that can be seen at an angle or down a hallway
• Digital display can be always-on or momentary
• Full configuration is easy, using just 3 buttons
• Analog output provides pressure reading to BMS system
• Works with Setra FLEX to serve rooms with multiple doors